Learning Technology

Available equipment and booking information

Find out more about the equipment that we have available to borrow.

A BeastGrip surrounded by equipment
We have equipment to fit most devices in a variety of situations.  When you know what equipment you would like to use, please visit the Multimedia Equipment Loans page linked below for more information and booking instructions.

 

Equipment loans

Our kits can be collected from the Main Library Helpdesk in George Square.  All bookings must be made through the Learning Spaces Technology team's central booking system, which can be found at the following link.  To find the DIY Film School equipment, you can click Sign In to view he full catalogue, then click Book, choose What? (or When? to select your booking date first) and select DIY Film School from the list.

Multimedia Equipment Loans

 

Exclusively "bring your own device"

All of our equipment is offered on a 'bring your own device' basis.  

We do not have phones or tablets available to lend, you must use your own device.

An open case with mojo equipment

Kits Available

Our kits are adjustable so they can fit phones of any make and size.  The main part of these are a 'grip' that allows your phone to be mounted on a tripod, offer stability while shooting 'hand-held', and are ready to add lights, microphones, and other accessories.  All of our kits come with a short shotgun microphone with indoor and outdoor filters, and a small LED light.

BeastGrip

Open case with BeastGrip kit
Beast Grip with an Android Phone

Should be compatible with devices with these dimensions

  • Width: from 50mm to 92mm
  • Height: from 95mm to 196mm
  • Thickness: from 5mm up to 18mm

This kit contains the following items

  • BeastGrip Pro
  • Side-zngle / macro combo-lens
  • RØDE VideoMicro (short directional shotgun mic)
  • 3.5mm microphone to phone cable (TRS to TRRS)
  • Wind sheild for VideoMicro
  • Manfroto LED light

Note for phones without a headphone jack (iPhone 7 and later, Moto, Pixel 2 and later, etc.) - you will need a 3.5mm headphone adapter to use the microphone - we do not supply these. (If you purchased an iPhone prior to September 2018, an adaptor was included in your devices box behind the sim eject tool). 

Product information: BeastGrip product page

Information: The BeastGrip offers fantastic stability and versatility.  The width, height, and camera position can all easily be adjusted, while still offering protection and a rock-solid grip for your phone.  The combo-lens that come with the kit allows for a variety of creative shots, from close-up macro to wide-angle scenes, all with high-quality optics.  There are grips on each side for hand-held shooting, and three anchor points on the base for attaching to a tripod.

 

ShoulderPod 

Open pox showing SholderPod and Kit
ShoulderPod with Light and Phone attached

Should be compatible with devices with these dimensions

Width up to 93mm - height & thickness shouldn't be an issue

This kit contains the following items

  • ShoulderPod-X1
  • RØDE VideoMicro (short directional shotgun mic)
  • 3.5mm mic to phone cable (TRS to TRRS)
  • wind sheild for VideoMicro
  • Manfroto LED light

Note for phones without a headphone port (iPhone 7 and later, Moto Z, Pixel 2 and later, etc.) - you will need a 3.5mm headphone adapter to use the microphone - we cannot supply these.

Product information: ShoulderPod-X1 product page

Information: The ShoulderPod is a fully modular system, allowing a great level of customisability.  Your phone is more 'free-standing' than in a full case-grip like the BeastGrip, and while this means that you cannot use changable lenses with it, the ShoulderPod lets you change your set up on the fly, switching from handheld and phone-only to tripod-mounted with a microphone with ease.