Study modes: Part-time, Full-time
Programme website: Bioengineering
The Institute for Bioengineering (IBioE) connects Engineering, Physical Sciences, Biology and Medicine, for innovative diagnostic and therapeutic biomedical devices and technologies.
Research themes include:
Synthetic Biology - to design and construct (e.g. to ‘engineer’) biological devices and systems, often at cellular level. Applications range from therapeutic to environmental.
Tissue Engineering - the production of 3D or 2D scaffolds or guidance cues for biological cells. Applications are largely therapeutic and also include new forms of lab-on-chip technology.
Biomedical Modelling and Measurement - understanding biological materials through modelling and measurement for applications in, for example, prosthetics, prediction of failure in blood vessels and the behaviour of bone with ageing. We also study the behaviour of biological materials experimentally and in most cases, non-invasively (e.g. via Raman and CARS spectroscopy).
Biomedical Devices and Sensors - working with colleagues in chemistry, we develop sensors on silicon for simple biological parameters (e.g. oxygen concentration) along with sensors of specific biomarkers of disease and therapy.
The development of transferable skills is a vital part of postgraduate training and a vibrant, interdisciplinary training programme is offered to all research students by the University’s Institute for Academic Development (IAD). The programme concentrates on the professional development of postgraduates, providing courses directly linked to postgraduate study.
Courses run by the IAD are free and have been designed to be as flexible as possible so that you can tailor the content and timing to your own requirements.
Our researchers are strongly encouraged to present their research at conferences and in journal during the course of their PhD.
Every year, the Graduate School organises a Postgraduate Research Conference to showcase the research carried out by students across the Research Institutes
Our researchers are also encouraged and supported to attend transferable skills courses provided by organisations such as the Engineering and Physical Sciences Research Council (EPSRC).
We offer a comprehensive range of exciting research opportunities through a choice of postgraduate research degrees: MSc by Research, MPhil and PhD.
Masters by Research
An MSc by Research is based on a research project tailored to a candidate’s interests. It lasts one year full time or two years part time. The project can be a shorter alternative to an MPhil or PhD, or a precursor to either – including the option of an MSc project expanding into MPhil or doctorate work as it evolves. It can also be a mechanism for industry to collaborate with the School.
Master of Philosophy (MPhil)
The Master of Philosophy (MPhil) degree resembles a PhD but generally takes two years instead of three and does not carry the same requirement for original contribution to knowledge. You pursue your individual research project under supervision, submitting your thesis at the end of the project.
Doctor of Philosophy (PhD)
As a PhD candidate you pursue a research project under continuous guidance, resulting in a thesis that makes an original contribution to knowledge. In the School of Engineering you will be linked to two academic supervisors and one industrial supervisor if the project is industrially sponsored.
A UK 2:1 honours degree, or its international equivalent, in an appropriate subject, or relevant qualifications and experience.
Please contact us to check the specific entry requirements for this programme before you apply
Check whether your international qualifications meet our general entry requirements:
English language requirements
All applicants must have one of the following qualifications as evidence of their English language ability:
an undergraduate or masters degree, that was taught and assessed in English in a majority English speaking country as defined by UK Visas and Immigration
- IELTS Academic: total 6.5 with at least 6.0 in each component
- TOEFL-iBT: total 92 with at least 20 in each section
- PTE(A): total 61 with at least 56 in each of the Communicative Skills scores
- CAE and CPE: total 176 with at least 169 in each paper
- Trinity ISE: ISE II with distinctions in all four components
Degrees taught and assessed in English must be no more than two and a half years old at the beginning of your degree programme. Language tests must be no more than two years old at the beginning of your degree programme.
Find out more about our language requirements:
Academic Technology Approval Scheme
If you are not an EU, EEA or Swiss national, you may need an Academic Technology Approval Scheme clearance certificate in order to study this programme.
- Fees for PhD Engineering (Bioengineering) - 3 Years (Full-time)
- Fees for PhD Engineering (Bioengineering) - 6 Years (Part-time) (Part-time)
- Fees for MPhil Engineering (Bioengineering) - 2 Years (Full-time)
- Fees for MPhil Engineering (Bioengineering) - 4 Years (Part-time) (Part-time)
- Fees for MSc by Research Engineering (Bioengineering) - 2 Years (Part-time)
- Fees for MSc by Research Engineering (Bioengineering) - 1 Year (Full-time)
Find out more about tuition fees and studying costs:
Select your programme and preferred start date to begin your application.
MSc by Research Engineering (Bioengineering) - 2 Years (Part-time)
MSc by Research Engineering (Bioengineering) - 1 Year (Full-time)
We encourage you to apply at least one month prior to entry so that we have enough time to process your application. If you are also applying for funding or will require a visa then we strongly recommend you apply as early as possible. We may consider late applications if we have places available, but you should contact the relevant Admissions Office for advice first.
- Graduate School of Engineering
- Faraday Building
- The King's Buildings Campus
- EH9 3JL