Integrated Micro and Nano Systems (IMNS) MScR
Study modes: Full-time, Part-time
Programme website: Integrated Micro and Nano Systems (IMNS)
The Institute for Integrated Micro and Nano Systems (IMNS) brings together researchers from integrated-circuit design, system-on-chip design, image-sensor design, bioelectronics, micro/nano-fabrication, microelectromechanical systems (MEMS), micromachining, neural computation and reconfigurable and adaptive computing.
Research interests include low-level analogue, low-power, adaptive and bio-inspired approaches, system-on-chip computing and applications from telecommunications to finance and astronomy. There is also a research focus on integrating CMOS microelectronic technology with sensors and microsystems/MEMS to create smart sensor systems. We also have a strong and growing interest in applications relating to life sciences and medicine, with particular focus on bioelectronics, biophotonics and bio-MEMS.
IMNS has laboratory facilities that are unique within the UK, including an advanced silicon and MEMS micro-fabrication capability coupled with substantial design and test resources. The Institute has an excellent reputation for commercialising technology.
The development of transferable skills is a vital part of postgraduate training and a vibrant, interdisciplinary training programme is offered to all research students by the University’s Institute for Academic Development (IAD). The programme concentrates on the professional development of postgraduates, providing courses directly linked to postgraduate study.
Courses run by the IAD are free and have been designed to be as flexible as possible so that you can tailor the content and timing to your own requirements.
Our researchers are strongly encouraged to present their research at conferences and in journal during the course of their programme.
Every year, the Graduate School organises a Postgraduate Research Conference to showcase the research carried out by students across the Research Institutes
Our researchers are also encouraged and supported to attend transferable skills courses provided by organisations such as the Engineering and Physical Sciences Research Council (EPSRC).
The Institute has laboratory facilities that are unique within the UK, including a comprehensive silicon and MEMS micro-fabrication capability coupled with substantial design and test resources.
The Institute has an excellent reputation for commercialising technology.
Please also read our additional information on undertaking a research degree in Engineering.
These entry requirements are for the 2022/23 academic year and requirements for future academic years may differ. Entry requirements for the 2023/24 academic year will be published on 3 October 2022.
A UK 2:1 honours degree, or its international equivalent, in an appropriate subject, or relevant qualifications and experience.
Please contact us to check the specific entry requirements for this programme before you apply.
Check whether your international qualifications meet our general entry requirements:
English language requirements
You must demonstrate a level of English language competency at a level that will enable you to succeed in your studies, regardless of your nationality or country of residence.
English language tests
We accept the following English language qualifications at the grades specified*:
- IELTS Academic: total 6.5 with at least 6.0 in each component.
- TOEFL-iBT (including Home Edition): total 92 with at least 20 in each component. We do not accept TOEFL MyBest Score to meet our English language requirements.
- CAE and CPE: total 176 with at least 169 in each component.
- Trinity ISE: ISE II with distinctions in all four components.
- PTE Academic: 62 overall with at least 59 in each component.
Your English language qualification must be no more than three and a half years old from the start date of the programme you are applying to study, unless you are using IELTS, TOEFL, Trinity ISE or PTE, in which case it must be no more than two years old.
(*Revised 17 November 2021 to add accepted PTE Academic qualifications.)
Degrees taught and assessed in English
We also accept an undergraduate or postgraduate degree that has been taught and assessed in English in a majority English speaking country, as defined by UK Visas and Immigration:
We also accept a degree that has been taught and assessed in English from a university on our list of approved universities in non-majority English speaking countries.
If you are not a national of a majority English speaking country, then your degree must be no more than three and a half years old at the beginning of your programme of study.
Find out more about our language requirements:
Additional programme costs
In addition to tuition fees, your programme may be subject to additional programme costs.
This should be discussed with your proposed supervisor and the Engineering Graduate School on application.
You will be responsible for covering living costs for the duration of your studies.
|MScR||1 Year||Full-time||Tuition fees|
|MScR||2 Years||Part-time||Tuition fees|
UK government postgraduate loans
If you live in the UK, you may be able to apply for a postgraduate loan from one of the UK’s governments. The type and amount of financial support you are eligible for will depend on your programme, the duration of your studies, and your residency status. (Programmes studied on a part-time intermittent basis are not eligible.)
Other funding opportunities
Search for scholarships and funding opportunities:
Select your programme and preferred start date to begin your application.
MSc by Research Engineering and Electronics - Integrated Micro and Nano Systems (IMNS) - 1 Year (Full-time)
MSc by Research Engineering and Electronics - Integrated Micro and Nano Systems (IMNS) - 2 Years (Part-time)
We encourage you to apply at least one month prior to entry so that we have enough time to process your application. If you are also applying for funding or will require a visa then we strongly recommend you apply as early as possible.
You must submit two references with your application.
References must be dated within the last year, signed and on on letterheaded paper.
Before you apply
We strongly recommend applicants find an academic that they are interested in working with before applying and contact them to discuss their research ideas. This initial contact can help when writing a research proposal and the application process.
See our website for a list of School research academics. Please be sure to include the name of your proposed supervisor in your online application.
When applying, applicants must provide a research proposal, even if for an advertised project. This helps evaluate your writing skills and research ideas and can help with both assessing your suitability for a research degree and whether we can offer supervision.
It should be no more than 2 x A4 pages and should indicate what areas of research interest you and the nature of the work you wish to undertake (experimental/theoretical/simulation).
CV and publications
When applying please provide a curriculum vitae and, if applicable, a list of your publications. If you have publications please provide your Researcher ID, ORCID ID, SCOPUS or Google Scholar profile address.
Find out more about the general application process for postgraduate programmes:
- Graduate School of Engineering
- Sanderson Building
- The King's Buildings Campus
- EH9 3FB