Information Services

Kits for phones

We have kits available for iPhones, and Android devices.


Open case with BeastGrip kit
Beast Grip with an Android Phone

Tested with these devices

  • iPhone 5 / 6 / 7 / 8 / X / 11 (including "Plus" or "Max" models)
  • Moto X
  • Samsing Galaxy S7 / S8 / S9 / S10

Should be compatible with devices with these dimensions

  • Width: from 50mm to 92mm
  • Height: from 95mm to 196mm
  • Thickness: from 5mm up to 18mm

This kit contains the following items

  • BeastGrip Pro
  • Side-zngle / macro combo-lens
  • RØDE VideoMicro (short directional shotgun mic)
  • 3.5mm microphone to phone cable (TRS to TRRS)
  • Wind sheild for VideoMicro
  • Manfroto LED light

Note for phones without a headphone jack (iPhone 7 and later, Moto, Pixel 2, etc.) - you will need a 3.5mm headphone adapter to use the microphone - we do not supply these. (If you purchased an iPhone prior to September 2018, an adaptor was included in your devices box behind the sim eject tool). 

Product information: BeastGrip product page

Support: BeastGrip user guide

Information: The BeastGrip offers fantastic stability and versatility.  The width, height, and camera position can all easily be adjusted, while still offering protection and a rock-solid grip for your phone.  The combo-lens that come with the kit allows for a variety of creative shots, from close-up macro to wide-angle scenes, all with high-quality optics.  There are grips on each side for hand-held shooting, and three anchor points on the base for attaching to a tripod.



Open pox showing SholderPod and Kit
ShoulderPod with Light and Phone attached

Fits: Universal (up to 93mm width - tested with iPhone 5 / 6 / 7 / 8 / X / 11 (including "Plus" and "Max" models), Moto X, Galaxy 7 / 8 / 9 / 10)

Kit contains: ShoulderPod-X1, RØDE VideoMicro (short directional shotgun mic), 3.5mm mic to phone cable (TRS to TRRS), wind sheild for VideoMicro, Manfroto LED light.

Note for phones without a headphone port (iPhone 7 and later, Moto Z, Pixel 2, etc.) - you will need a 3.5mm headphone adapter to use the microphone - we cannot supply these.

Product information: ShoulderPod-X1 product page

ShoulderPod support and information

The ShoulderPod is a fully modular system, allowing a great level of customisability.  Your phone is more 'free-standing' than in a full case-grip like the BeastGrip, and while this means that you cannot use changable lenses with it, the ShoulderPod lets you change your set up on the fly, switching from handheld and phone-only to tripod-mounted with a microphone with ease.  We have a few suggestions for configurations available on the page linked to above, along with a video on Media Hopper on how to get started.